Online Double-Conversion
The system uses double-conversion technology to provide continuous pure sine wave AC power for connected outdoor communication and network equipment.
Share:
IP55 Outdoor Online UPS for Telecommunications and Network Power Supply
The HW Series IP55 Outdoor Online UPS provides double-conversion power protection for outdoor telecommunications and network equipment, with 1kVA to 10kVA configurations designed for demanding operating environments.
The HW Series is an integrated outdoor Uninterruptible Power Supply (UPS) developed for wireless communication systems, outdoor microcellular base stations and networking applications. Its online double-conversion architecture delivers pure sine wave AC output while responding to disturbances in the incoming electricity supply.
Designed with an IP55 enclosure, the series incorporates dust and water ingress protection features suited to outdoor installations. The published operating temperature range is -40°C to +50°C, and available capacity options include 1kVA, 2kVA, 3kVA, 6kVA and 10kVA models with single-phase input and output.
SYSTEM FEATURES
Designed for Outdoor Power Supply Requirements
The HW Series combines online UPS operation with an outdoor cabinet design, digital control and battery management functions for telecommunications and network power applications.
IP55 Outdoor Enclosure
The cabinet incorporates an IP55 enclosure design with features for limiting dust and water ingress, including protected ventilation and cabinet construction.
Wide Operating Temperature
The published operating temperature range of -40°C to +50°C supports consideration for installations exposed to different outdoor climatic conditions.
Digital UPS Control
Microprocessor-based digital control and high-frequency pulse width modulation support inverter operation and system response to changes in input conditions.
Battery and Status Monitoring
The LCD provides information on input and output voltage, frequency, battery voltage, battery capacity and connected load percentage.
Optional Temperature Control
The brochure describes optional heat exchanger and heater with temperature controller arrangements for installations requiring additional cabinet temperature management.
TECHNICAL DETAILS
HW Series Technical Specifications
The HW Series offers five capacity configurations. The following information is taken from the original technical brochure.
| UPS Technology | Online Double-Conversion |
|---|---|
| Enclosure Protection | IP55 |
| Capacity Range | 1kVA – 10kVA |
| Input / Output | Single-Phase / Single-Phase |
| Nominal Voltage | 220 / 230 / 240VAC |
| Nominal Frequency | 50Hz / 60Hz |
| Output Power Factor | 0.9 |
| AC / DC Transfer Time | 0ms |
| Operating Temperature | -40°C to +50°C |
| Operating Humidity | 0–95% RH (Non-Condensing) |
| Control Panel | LCD Status Display |
| Communication | RS232; Optional SNMP Card |
MODEL OPTIONS
Available HW Series UPS Models
Compare the capacity, output power and DC supply voltage of the available configurations. The model information below follows the manufacturer's published specification.
| Specification | HW1K-11 | HW2K-11 | HW3K-11 | HW6K-11 | HW10K-11 |
|---|---|---|---|---|---|
| Capacity | 1kVA | 2kVA | 3kVA | 6kVA | 10kVA |
| Output Power | 0.9kW | 1.8kW | 2.7kW | 5.4kW | 9kW |
| DC Supply Voltage | 36VDC | 96VDC | 96VDC | 240VDC | 240VDC |
Battery configurations, physical dimensions and other specifications vary by model. Refer to the original technical brochure when making a final selection.
APPLICATIONS
Outdoor Telecommunications and Network Applications
The HW Series is intended for outdoor communication and networking environments, including remote sites where power supply quality and exposure to outdoor conditions must be considered.
Outdoor Telecom Equipment
Wireless Base Stations
Remote Communication Sites
Outdoor Network Equipment
CONFIGURATION OPTIONS
Additional Outdoor Cabinet Options
The original brochure identifies additional arrangements for managing cabinet temperature in different operating environments. These are options rather than standard inclusions.
Heat Exchanger
A heat exchanger option is described for reducing temperature inside the enclosure in applications with additional cabinet protection requirements.
Heater and Temperature Controller
An adjustable heating arrangement is available for managing low-temperature conditions affecting the UPS and battery system.
PRODUCT DOCUMENTATION
Original HW Series Product Brochure
The following original brochure pages present the outdoor UPS design, product features, cabinet configuration and detailed technical specifications.
PRODUCT HIGHLIGHTS
What You Get
Online double-conversion UPS with pure sine wave AC output.
IP55 outdoor enclosure construction with dust and water ingress protection features.
Available 1kVA, 2kVA, 3kVA, 6kVA and 10kVA capacity configurations.
LCD operating display and supported communication functions, with additional options subject to model selection.
OUTDOOR UPS ENQUIRY
Explore the HW Series Outdoor UPS Range
Discuss your outdoor installation environment, connected load, battery requirements and preferred capacity to identify a suitable HW Series configuration.
Inquiry - HW Series IP55 Outdoor Online UPS (1–10kVA)
